Welcome to visit Geoscience!

Geoscience ›› 2022, Vol. 36 ›› Issue (05): 1432-1439.DOI: 10.19657/j.geoscience.1000-8527.2022.061

• Carbon Storage Science and Geothermal Development • Previous Articles     Next Articles

Study on Different Potential Exploitation Technology of CO2 Huff and Puff in High Water Cut Period of Strong Bottom Water Reservoir

LUO Fuquan1,2(), WANG Miao2, WANG Qunhui2, GENG Wenshuang2, HOU Jian1(), ZHAO Huihui2   

  1. 1. School of Petroleum Engineering,China University of Petroleum, Qingdao, Shandong 266580, China
    2. Research Institute of Exploration and Development, Jidong Oilfield Company, PetroChina, Tangshan, Hebei 063004, China
  • Received:2021-12-10 Revised:2022-07-30 Online:2022-10-10 Published:2022-11-03
  • Contact: HOU Jian

Abstract:

The shallow strong edge and bottom water reservoir in Jidong Oilfield has entered the stage of ultra-high water cut development. The remaining oil is highly dispersed and the oil saturation is uneven. The effect of CO2 huff and puff in different oil wells is different, which is difficult to achieve the overall efficient development of the reservoir. Considering the different oil saturations of reservoirs, it is necessary to design the slug combination and development policy of CO2 huff and puff, so as to provide guidance for improving the development effect of CO2 huff and puff. By means of two-dimensional physical simulation and reservoir numerical simulation, the mechanism of water control and oil increase in different CO2 huff and puff methods is studied, and the oil saturation limit corresponding to different CO2 huff and puff methods to oil saturation is quantitatively evaluated. The differential design chart of injection and production parameters under different oil saturation is established. The results show that when the residual oil saturation is between 0.47 and 0.50, the comprehensive economic effect of CO2 huff and puff is the best. When the remaining oil saturation is between 0.43 and 0.47, the CO2+plugging agent throughput method is the best. When the residual oil saturation is between 0.375 and 0.430, the CO2+surfactant+plugging agent throughput is the best. The above research results are of great significance for the differential design of CO2 huff and puff in ultra-high water cut reservoirs to accurately tap the remaining oil and realize the overall efficient development of reservoirs.

Key words: CO2 huff and puff, typical high water cut period, differential design, strong edge and bottomwater

CLC Number: