Welcome to visit Geoscience!

Table of Content

    20 April 2006, Volume 20 Issue 4
    Engineering Geology and Environmental Geology
    Platinum Group Element Geochemistry of the Devonian Arc-Related Picrites of the South Margin of the Altai Mountains in Xinjiang and Its Geological Implications
    ZHANG Zhao-chong,ZHOU Gang,YAN Sheng-hao,CHEN Bai-lin,HE Yong-kang
    2006, 20(4):  519-526. 
    Asbtract ( 1762 )   PDF (391KB) ( 1122 )  
    Related Articles | Metrics

    Platinum-group element (PGE) data for global arc lavas are very scarce.PGE analyses for the picrites of the middle Devonian Beitashan Formation at the south margin of Altai Mountains show that the PGE concentrations are within a narrow range, and their primitive mantle normalized PGE patterns resemble those from Grenada picrites, Lesser Antilles Arc in Atlantic, which is characterized by the enrichment of PPGE although the PGE contents of the researched picrites are higher than the latter, and lower than those from large igneous provinces.Some characteristic ratios suggest the picrites and ankaramites were derived from asthenospheric mantle, and high Os/Ir ratios reflect the involvements of pelagic sediments.Pd/Ir versus Ni/Cu diagram implies that the picrites and ankaramites were not primary magmas, but MgO-high basalts with excess olivines, whereas Pd versus Cu diagram suggests a S-undersaturated primary magma.The PPGE may have slightly more transport efficiency in slab-derived fluids than do the IPGE.

    Characteristics and Origin of Alkali-rich Porphyries from Beiya in Western Yunnan
    XU Shou-min,MO Xuan-xue,ZENG Pu-sheng,ZHANG Wen-hong,ZHAO Hai-bin,ZHao Han-dong
    2006, 20(4):  527-535. 
    Asbtract ( 1743 )   PDF (798KB) ( 1255 )  
    Related Articles | Metrics

    This paper presents petrological and geochemical data of Au-mineralization-related alkali-rich porphyries in the Beiya gold deposit and its adjacent regions, western Yunnan. Geochemically, the alkali-rich porphyries from Beiya have relatively high contents of SiO2 (>68%) and Al2O3 (13.45%-15.22%), high Sr/Y and (La/Yb)N ratios, enrichment in Sr (365×10-6-930×10-6) but depletion in Yb and Y  (Yb:0.64×10-6-1.17×10-6; Y: 7.17×10-6-12.25×10-6), and weak Eu negative anomalies. All of those characteristics mentioned above indicate that alkali-rich porphyries from Beiya are somewhat similar to adakites in geochemistry. However, their lower contents of MgO, Cr and Ni are different from those of typical adakites. Petrological and geochemical characteristics of alkali-rich porphyries suggest that magmas might not be generated from subducted oceanic slab, but likely from the base of thickened crust, corresponding to eclogite-facies. High abundance of trace elements Rb, Ba, Th and K in alkali-rich porphyries may be attributed to fluid metasomatism. Dynamically, magma generation might be related to a face-to-face intra-continental subduction beneath Sanjiang blocks of the India continent versus the Yangtze continent, strike-slip movements of the Jinshajiang-Red River fault and tectonics-induced asthenospheric upwelling and metasomatism by fluids released from subducting slabs.

    LA-ICPMS Dating of Zircon U-Pb and Tectonic Significance of  Honghuapu Subduction-Related Intrusions in the West Segment of Northern Qinling Mountains
    WANG Hong-liang,HE Shi-ping, CHEN Juan-lu,XU Xue-yi,SUN Yong,DIWU Chun-rong
    2006, 20(4):  536-544. 
    Asbtract ( 1531 )   PDF (421KB) ( 1119 )  
    Related Articles | Metrics

    Honghuapu intrusions in the west segment of Northern Qinling Mountains are dominated by tonalite with medium-fine-granular structure, which carry the geochemic characteristics of subduction-related granitic rocks. Zircons obtained from Honghuapu intrusions can be divided into three groups according to the shapes and CL images. Based on the results of LA-ICPMS dating of zircon U-Pb isotope, we get three ages of (1,765-1±8-4)Ma, (450.5±1.8)Ma and (413.5±1.3)Ma, these ages indicate different formation age of hereditary zircons, magmatic crystallization zircons and metamorphic zircons, which may represent three tectonic-thermal events coincide to Lüliang Movement and Caledonia Movement respectively. Whereas, the age of (450.5±1.8)Ma is the formation age of Honghuapu intrusions and also implies the formation age of Early Paleozoic island arcs in Northern Qinling. These new LA-ICPMS datings of zircon U-Pb have great significance to the study of Proterozoic and Early Paleozoic tectonic framework, evolution and dynamic mechanism of Qinling Mountains.

    Granitoids Characteristics and Tectonic Setting of Danghenanshan Area in South Qilian Mountains
    LIU Zhi-wu, WANG Chong-li, SHI Xiao-hu
    2006, 20(4):  545-554. 
    Asbtract ( 7689 )   PDF (355KB) ( 1345 )  
    Related Articles | Metrics

    Danghenanshan area lies in South Qilian Mountains which is a great metallogenic belt. In this area, the granitoids are composed of Zhazigou pluton,Jijiaogou pluton and Jiagongtai pluton and all related to mineralization of gold and copper. Zhazigou pluton is mainly constituted by granodiorite and intrudes Sinian Period volcanic rocks. Jijiaogou pluton is mainly constituted by quartz monzodiorite, Jiagongtai pluton is mainly constituted by plagiogranite,and they both intrude Ordovician Period clastic rocks. The Rb-Sr isochron ages of the three plutons are (510.85±14)Ma, (395.06±51)Ma and (355±91)Ma respectively, the former formed during early-middle  Cambrian Period,the latter two formed during Silurian Period and Devonian Period.This three plutons all-correspond to calc-alkaline series.In this series, Zhazigou pluton belongs to middle-potassium granodiorite series, Jiagongtai pluton belongs to high-potassium monzonite ones,and Jiagongtai pluton belongs to low-potassium trondhjemite ones.The granitoid characteristics of lithofacies, petrochemistry, trace elements and REE geochemistry indicate that this three plutons are all I-type granitoids, formed in active continental margin,and are the results of tectonic movement and and magmatism of middle-south Qilian Mountains during Caledonian.

    Geochemical Characteristics of Qushan Mica Granitic Gneisses from Ultrahigh Pressure Metamorphic Belt in the Southern Sulu Terrane and Its Tectonic Significance
    QI Xue-xiang, QI Jin-zhong
    2006, 20(4):  555-563. 
    Asbtract ( 1853 )   PDF (1046KB) ( 1151 )  
    Related Articles | Metrics

    The mica granitic gneisses is an important rock type for Qushan complex from UHP belt in the southern Sulu terrane, which had suffered UHP metamorphism, but still had the petrological features of granite. The geochemical analysis data indicate that the mica granitic gneisses have the characteristics of A-type granitoid with high K2O contents and TFeO/MgO ratios, and with low CaO contents, and high peraluminous coefficient. The mica granitic gneisses have the characteristics of the REE patterns with steeply fractionated and strongly negative Eu anomalies, the trace elements patterns with negative Ba, P, Ti and Sc anomalies, high Sr/Y, La/Yb, Rb/Sr, Rb/Ba ratios, and TiO2<0.2%,Y/Nb >1.2,and all of the samples plots in the Within Plate Field in the Rb vs (Yb+Ta) and Rb vs (Y+Nb) discrimination diagrams, which show that the mica granitic gneisses formed in non-orogenic environment but within plate related with rifting. The zircon SHRIMP U-Pb dating inferred that the time of magmatic emplacement was middle-late Upper Proterozoic ((722±32)Ma), it was resulted from the magmatic activity that was identical early emplaced feldspar granitic gneisses in Qushan complex and the metamorphic volcanics overlying on Qushan complex during Rodinia continent breakup and within plate rifting in Yangtz block.

    Tectonic-Magmatic Evolution and Gold Mineralization in Yangshan Gold Belt, Gansu Province, China
    QI Jin-zhong, YANG Gui-cai, LUO Xi-ming
    2006, 20(4):  564-572. 
    Asbtract ( 3042 )   PDF (293KB) ( 1407 )  
    Related Articles | Metrics

    Yangshan gold deposit is located in Wenxian County, Gansu Province.Geochronology study shows that three magmatichydrothermal events happened in the ore district respectively in Early Jurassic, Early Cretaceous and Early Tertiary.Stable isotope analysis shows that δD value of fluid inclusions in mineralized quartz veinlet ranges from-75‰ to-56‰, δ18OH2O value ranges from 3.7‰ to 12.2‰, and δ34S value of pyrite and stibnite ranges from-2.2‰ to-0.7‰, indicating that metallogenic materials and ore fluid are mainly from the magmatic events.Analysis of tectonic deformation indicates that ductile deformation occurred in Triassic Period, ductile-brittle deformation occurred in Early Jurassic, while brittle deformation occurred after Jurassic Period.The brittle deformation experienced early pression period and late tension period.By comparing the tectonic-magmatic events with the regional tectonic evolusion, we propose that the coupling of three magmatic-hydrothermal events affected by regional extension contributed to mineralization of Yangshan gold deposit.

    The “Radiolarian Cherts” in the Structural-Ophiolitic Melange Belt, Northeastern Jiangxi,Is Not the “Siliceous Rock” of Maokou Formation
    DENG Guo-hui, LONG Jun-jun, HE He-ling
    2006, 20(4):  573-578. 
    Asbtract ( 5417 )   PDF (228KB) ( 1225 )  
    Related Articles | Metrics

    The “radiolarian cherts”within the Northeastern Jiangxi tectonic belt are mainly distributed in Zhangshudun-Maoqiao area, belonging to structuralophiolitic melange belt in Zhangcun Group, flanked by fault to the around lithostratigraphy. They are argillaceous siliceous rocks revealed by their mineral and chemical components. These rocks, associated with argillaceous phyllite, metavolcanite and ophiolite, contain “doubtful” Late Paleozoic radiolarian and are reconstructed by low greenschist-facies metamorphism. While the siliceous rock of Maokou (and/or Gufeng) Formation are widely developed in the Northeastern Jiangxi and South Anhui,they accord with the law of superposition (Smith Stratigraphy) and conformbly located under the coal measure strata of Leping Formation and on the limestone of Xiaojiangbian Formation. These rocks are “pure” siliceous rocks, belonging to the Permian Period. They contain aboundant fossils like the Brachiopod, Fusulinidea faunas and corals, without metamorphism and re-crystallization, associated with carbon-mudstone and limestone. Thus, the “radiolarian cherts” and the siliceous rock of Maokou Formation are diferent lithostratigraphic units.

    The High-resolution Sequence Stratigraphy Framework and Its Geological Significance of Triassic Yanchang Formation Ch8-Ch7, Ordos Basin
    FU Qiang,LI Yi
    2006, 20(4):  579-584. 
    Asbtract ( 7472 )   PDF (266KB) ( 1823 )  
    Related Articles | Metrics

    Triassic Yanchang Formation Ch8-Ch7 of Ordos Basin was situated in the middle and lower parts of Yanchang Formation, which represented maximum extension of lake basin and was chiefly ascribed to lacustrine delta facies.The character of basal level cycle of Triassic Yanchang Formation Ch8-Ch7 in Ordos Basin is analyzed by the theory of high-resolution sequence stratigraphy and is totally subdivided into 1 long-term base level cycle, 3 middle-term cycles and 15 to 25 short-term cycles.Based on the above, the environment of Ch8 is delta and that of Ch7 evolved  from semi-deep lake to deep lake.MSC3 and MSC4 of 3 middle-term cycles are unsymmetry cycles dominated by ascending half cycles.During the period of the top of MSC4 ascending half cycle, maximum-flooding surface was formed.MSC5 is an unsymmetry cycle dominated by a drooping half cycle.At the same time turbidite fan developed.According to the different wells- base-level cycles, it indicated that the reservoir developed in the sub-distributary channels, the debouchure bars and the turbidities in the half ascending short-term cycles, and it is crossed with the prodelta mud, so lithologic reservoir is easily formed.Establishment of isochronous stratigraphic framework based on the theory of high-resolution sequence stratigraphy should further direct significantly the exploration activity of Yanchang Formation in Ordos Basin.

    Basin Superimposing Characteristics and Hydrocarbon Generation History of Paleozoic Source Rock in the East Part of the North China
    HU Zong-quan
    2006, 20(4):  585-591. 
    Asbtract ( 1665 )   PDF (252KB) ( 1579 )  
    Related Articles | Metrics

    In the east part of the North China,there are potential carbonate source rock of sea facies of Lower Paleozoic and good coal formation source rock of Upper Paleozoic. Undergoing multiple types of superimposing process of basins with multiple episodes and different scales, and experiencing uplift, erosion and change of multiple episodes among the superimposing episodes, Paleozoic source rock in different areas has different hydrocarbon generation histories. Strata calibration and RO data indicate that there should be Triassic deposition of big thickness in Jiyang depression, and superimposing process of Triassic basins is crucial for hydrocarbon generation history of Paleozoic source rock. With basin superimposing model and evolution grade of Upper Paleozoic referred, the generation history of Paleozoic source rock is divided into three stages, Triassic as the early stage, Jurassic to Cretaceous as the middle stage, and since Early Tertiary to now as the late stage. The areas such as Jiyang depression and Dongpu sag with imbedding histories of shallow imbedding in the early stage, uplift in the middle stage and deep imbedding in the late stage have big potentials of secondary hydrocarbon generation. The balanceable surface superimposition of Upper Paleozoic basin makes RO of Lower Paleozoic  higher than Upper Paleozoic, and the difference is more than 0.3%. So in the end of Triassic, Lower Paleozoic source rock achieved hydrocarbon generation peak, which expensed the initial organic matter and reduced the potentials of secondary hydrocarbon generation to some extent.

    The Meso-Cenozoic Basin Type and Tectonic Evolution in the Northern Margin Region of the Qaidam Basin
    WANG Xin-guo,CAO Dai-yong,ZHAN Wen-feng,LIU Tian-ji
    2006, 20(4):  592-596. 
    Asbtract ( 2030 )   PDF (165KB) ( 1278 )  
    Related Articles | Metrics

    The subsidence history and the balanced cross sections are applied in this paper. The former is used for researching the up and down history in the vertical direction, and the latter is used for researching the extensional and compressional history in horizontal direction. The analysis of the quantitative research result with the regional geology background proves that tectonic evolution can be divided into Mesozoic(J-K)and Cenozoic(start from E1+2)phases from Mesozoic in the Northern Margin Region of the Qaidam Basin. In the Mesozoic evolution phase(J1-J2), the subsidence history curve has the quality of extensional basin, and the restoration result of the balanced cross sections has the quality of extension, too. The maximal extension ratio of it is 1.9% and the rate is 19.48 m/(Ma·km). The extension stress field is aroused by the difference of the Qaidam plate and the adjacent plates-movements. Besides, because of the self-circumgyrate of the Qaidam plate, the subsidence rates and the extension ratios are different in the three sags. In the Cenozoic evolution phase, the subsidence curve has the character of the foreland basin, and the restoration result of the banlanced cross sections has the quality of compression, too. The maximal compression ratio of it is 4.96% and the rate is 14.09 m/(Ma·km). The  compression stress field is aroused by the collision between the India plate and Eurasia plate. Furthermore, because of the Himalayan movement, the subsidence rates and extension ratios have the character of the graduate “episode ”.

    Tectonic Evolution and Its Effect on the Accumulation Elements of Biogas in Qujing Basin,Yunnan
    HOU Yu-guang, HE Sheng, TANG Da-qing
    2006, 20(4):  597-604. 
    Asbtract ( 2947 )   PDF (822KB) ( 1409 )  
    Related Articles | Metrics

    Qujing Basin is one of several Tertiary sedimentary basins with the discovered biogenic gas resources in Yunnan Province. Through tectonic and sedimentary interpretation using two-dimensional seismic lines combining with geological data and well logs, this article discusses the tectonic characteristics and evolution of this basin, and analyzes the effect of tectonic evolution on the accumulation elements of biogenic gas. During the subsidence of faulting stage within the Early to Mid Oligocene, the major gas source-rocks of the large-scale dark mudstone of Caijiachong Formation were deposited. From the Late Oligocene to the Early Pliocene, as a result of cooling due to the entire uplift and erosion of this basin, the overconsumption of the organic matters in Caijiachong Formation by organic maturation and hydrocarbon generation or biogas generation significantly was avoided. In the period of down-warping stage of the Late Pliocene, the secondary gas source rocks of the coal-bearing, sandstone reservoirs, mudstone cap-beds and lithological traps in Ciying Formation were formed. In the end of Pliocene, the basin underwent the stage of compression-shearing uplift and shrink, structural traps of fault nose and fault-anticlines as well as structural-lithological combination traps were formed; The steady subsidence stage of the Quaternary was the period of biogas accumulation.

    Tectonic Controls on Gas Hydrate Deposits and Their Characteristics
    ZHANG Guang-xue,ZHU You-hai,LIANG Jin-qiang,WU Shi-guo,YANG Mu-zhuang,SHA Zhi-bi
    2006, 20(4):  605-612. 
    Asbtract ( 1720 )   PDF (1094KB) ( 1301 )  
    Related Articles | Metrics

    Tectonic environment is an important factor of gas hydrate formation. Special structure bodies, such as accretionary prism, fault-folded system, mud dirpir and slide body are important geological reservoirs of gas hydrates. Based on studying of these special structure bodies and fluid movements for gas hydrate formation, six types of tectonic-controlled gas hydrate reservoirs including accretionary prism, buried anticline, basin-edge slope, fault-folded, slide and dirpir are summarized. The South China Sea is located at the junction of the Eurasian, the Pacific and the Indian-Australian plates, and it is one of the complex continental margins which are of active margin in early and passive margin in late. Five tectonic types of gas hydrate deposits including accretionary prism, fault-folded, dirpir, slide type and basin-edge slope are identified in the South China Sea.

    Analysis of Lithological Hydrocarbon Enrichment Factors in Erlian Basin,Inner Mongolia
    LIU Zhen, HAO Qi, ZHAO Xian-zheng, ZHANG Yi-ming, YI Shi-wei, YANG De-xiang
    2006, 20(4):  613-620. 
    Asbtract ( 1830 )   PDF (568KB) ( 1457 )  
    Related Articles | Metrics

    Based on exploration achievements of lithological reservoirs in Erlian Basin, the hydrocarbon enrichment factors are analysed in four primary sags. Lithological hydrocarbon enrichment factors include luxuriant oil-source, high quality sand-body trap and confluence pathway. The luxuriant oil resources are substantial base of hydrocarbon enrichment, because there are two sets of source rocks with huge thickness, widespread distribution, large resource extent and several relationships to sandbodies in Erlain Basin. The high quality sand-body trap is characteristic of a large-scale trap, having furthersome types of reservoir facies and favorable reservoir, which are key factors for hydrocarbon enrichment. The analysis of the high quality sandbody trap's characteristics suggests that large-scale traps include single large-sized sand-body trap and several overlaying small-sized lithological traps; furthersome reservoir facies involve fan delta, braided river delta and sublacustrine fan; the hydrocarbon enrichment usually forms in favorable reservoirs. Furthermore, abundant hydrocarbon enriches in high quality sand-body traps by lateral confluence pathway in digitiform sand and fault vertical confluence pathway.

    Stochastic Simulation of Reservoir Lithofacies Based on Markov Chain Models with Different Neighborhood Systems
    LI Jun, HAO Tian-yao, LIU Jian, ZHOU Cui-ying, XU Ya, ZHAO Bai-min
    2006, 20(4):  621-627. 
    Asbtract ( 1913 )   PDF (4228KB) ( 1456 )  
    Related Articles | Metrics

    For the difficulty of getting transition probability matrixes in various directions in Markov chain models, the paper presents a method to figure out it, which makes getting transition probability matrixes of different neighborhood systems of Markov chain models easier and more feasible.Furthermore,Monte Carlo sampling method is used to simulate reservoir lithofacies, based on different neighborhood systems of Markov chain models.In the end, the different simulated results are compared and the characteristics and applications of different neighborhood systems in the study of reservoir are discussed.

    The Analysis of Sediment Provenance in Early-Middle Period of Late Paleozoic in the Southwest of Ordos Basin
    CHEN Quan-hong, LI Wen-hou, WANG Ya-hong, JIN Shuan-lian, GAO Yong-xiang
    2006, 20(4):  628-634. 
    Asbtract ( 6399 )   PDF (525KB) ( 1212 )  
    Related Articles | Metrics

    The source rocks of the southwestern Ordos Basin were the mesometamorphic,  magmatic active and migmatizational complex metamorphic rocks of Archaean and the metavolcanite-sediment rocks of the Lower Proterozoic.The tectonic character had steady-active dualism.In different source distributing regions, there were quite differences between the characters of light minerals and those of the heavy ones.The quartz was brown metamorphosed rocks, and the feldspar was mainly alkalescent feldspar, the source rock of which was the quartz sandstone, quartz schist, quartz rocks and granite or granitic gneiss of the Taihua Group, the Qinling Group and the Kuanping Group.After being analysed synthetically, the study area had three source regions.The constituent of clastic debris and heavy minerals had clearly different characters in the southern and northern source distributing regions.In the period of member 8 of Xiashihezi Formation, the western region of Qingtongxia-Guyuan rupture began to upheave, and the western sediment provenance began to supply the old sediment gradually, where volcano movements once existed.In the southern or southwestern source near the source regions, the sandstone was thick and the reservoir  properties were better, which were quite different from the Haiyuan source.What's more, the sandstone was consistent with that of Longxi ancient land.The feldspar-dissolved-pores especially developed in Shanxi Formation and existed in the secondary dissolved pores belts, which was the best exploring target plot.

    Masking of Sand/Mud Interbeds in Non-marine Reservoirs and It's Effect on Time-lapse Seismic Data Interpretation
    WANG Da-wei, LIU Zhen, ZHAO Wei, XIA Qing-long
    2006, 20(4):  635-640. 
    Asbtract ( 1688 )   PDF (186KB) ( 1059 )  
    Related Articles | Metrics

    Taking the differential characteristics of the time-lapse seismic waveform as a breakthrough point, the relation between the characteristics and velocity of sand/mud interbeds in non-marine reservoirs is analyzed. Under the following conditions, (1)a five-layer model which consists of mud and shale, (2)Pwave velocity in mud is 2,400 m/s, (3)P-wave velocity in sand is 2,700 m/s, and (4)variation in shear wave velocity in sand is 150 m/s, the study simulates the time-lapse seismic waveform of the five-layer model by the use of convolution and time-lapse difference formula. It is revealed that the time-lapse seismic waveform of interbeds is a multi-peak complex wave, and the thickness of middle shale is a critical factor for the characteristics of the seismic waveforms, which has a critical value about to a quarter of wavelength. The masking effect could be created when the thickness of middle shale is less than this value, in the other word, the time-lapse seismic responses of the upper layers will mask those of the bottom lays.

    Adaptability of Reservoir for the Re-injecting Polymer-bearing Sewage
    YIN Yin, LIU Da-meng, HUANG Jin-feng, WANG Jin-zhan
    2006, 20(4):  641-646. 
    Asbtract ( 1651 )   PDF (190KB) ( 1039 )  
    Related Articles | Metrics

    Through analyzing the molecular properties of polymer and component changes after disposal of polymer-bearing sewage produced by polymer flooding, it is considered that polymer concentration is a key factor to lower the permeability of reservoir. The results from the core displacement test show that the adaptability of reservoir with different permeabilities for the polymer-bearing sewage with different polymer concentrations is different. It is proposed to choose suitable polymer concentration for different types of injection water. The research result has a significant reference for utilizing this kind of sewage water and studying the standard of injection water after polymer-flooding.

    Chemical Equilibrium in Silicate Systems: Part 3, Reaction Kinetics
    MA Hong-wen,QI Hong-bin,WANG Lei,NIE Yi-miao,JIN Xin,WANG Ying-bin,SU Shuan-qing
    2006, 20(4):  647-656. 
    Asbtract ( 1804 )   PDF (482KB) ( 1501 )  
    Related Articles | Metrics

     The basic principles of reaction kinetics in mineral materials science were briefly reviewed. The experimental and theoretical approaches to the reaction kinetics of typical processes in silicate systems were performed, including (1) sintering reactions in the system of high-alumina flyash-sodium carbonate at intermediate temperature, and thermal decomposition of K-feldspar in the system of potassium feldspar-gypsum-calcium carbonate; (2) hydrothermal decomposition of K-feldspar and crystallizing reaction of tobermorite in the system of KAlSi3O8-Ca(OH)2-H2O; (3) crystallizing reaction of β-wollastonite from glass-ceramic in the system of SiO2-Al2O3-CaO; and (4) adsorption reactions to Hg2+ in polluted water by both micro-and meso-porous molecular sieves of 13X type zeolite and MCM-41 materials, respectively. Approaches to reaction kinetics for the processes in silicate systems are in theory of significances for optimizing experimental scheme of preparing mineral materials, improving processing control in industry, and enhancing the properties of mineral materials products.

    Sintering Reaction of Nepheline Syenite: Thermodynamic Analysis and Experimental Study
    WANG Fang, MA Hong-wen, XU Jin-ming, SU Yu-zhu
    2006, 20(4):  657-662. 
    Asbtract ( 1716 )   PDF (220KB) ( 1745 )  
    Related Articles | Metrics

    Nepheline syenite is an important kind of mineral resource rich inK2O, Al2O3and SiO2. Thermodynamic calculation shows that the temperature of the sintering reaction is around 800 K(527 ℃), with sodium carbonate as the additive, and the products are mainly NaAlSiO4, KAlSiO4 and Na2SiO3. The sintering experimental results show that the decomposition temperatures of the major aluminosilicate minerals in the nepheline syenite are ranging from 1,073 to 1,123 K(800-850 ℃), and the products are those as expected. The decomposition rate of minerals in the nepheline syenite is over 95%. Leaching experiments of the sintered products by acidic solution show that the separation of silica and alumina by the current procedure is superior, with extraction rates of SiO2, Al2O3 and K2O up to 91.4%, 92.2% and 92.5% respectively. The technique developed in this paper is therefore a process with less energy and raw mineral resource consumptions, and cleaning production, compared with the Russian limestone-sintering technique.

    Occlusion of KNO and NH4NO3  in 4A Zeolite Molecular Sieve
    ZHENG Hong, ZHANG Bei-bei, MA Hong-wen, WANG Jun-ling, JIANG Hao, PENG Hui
    2006, 20(4):  663-667. 
    Asbtract ( 1682 )   PDF (171KB) ( 1115 )  
    Related Articles | Metrics

    The capacity of synthetic 4A zeolite molecular sieve treated with molten salts to occlude ammonium nitrate and potassium nitrate has been determined, and the salt-occluded zeolite 4A has been characterized with XRD, IR and TG-DTA methods. In a laboratory setting, the KNO3 treated zeolite 4A contained 15.01% of K(calculated as K2O)and 9.23% of NO-3, and the NH4NO3-treated zeolite 4A contained 10.78% of NO-3 and 0.94% of NH+4. Molten salt treatment resulted in changes of overall and relative intensities of peaks in X-ray diffractograms of zeolite 4A. The presence of occluded salts in zeolite 4A was confirmed by a decrease of water IR absorption band intensities around 1,640 cm-1, which was expected with salt occlusion, and two absorption bands, strong around 1,390 cm-1 and weak around 825 cm-1, which are identified as V3 and V2 modes of nitrate ions, and weight losses and sequential endo and exothermal responses of KNO3 and NH4NO3 in TG-DTA curves- Occlusion of molten salts in zeolite 4A had little or no effects on its framework. This study shows that the capacity of 4A zeolite molecular sieve to store nutrients can be greatly increased by salt occlusion and the salt-occluded zeolite 4A is a potential candidate as slow-release fertilizer

    Using RS, GIS and AHP Technologies for Landslide Hazard Assessment: Taking Tiantai Landslide in Xuanhan County, Sichuan Province as an Example
    HOU Min, JIA Shao-hui,GUO Zhao-cheng
    2006, 20(4):  668-672. 
    Asbtract ( 5303 )   PDF (1642KB) ( 1350 )  
    Related Articles | Metrics

    Based on RS (remote sensing) and GIS (geographic information system), landslide hazard assessment of Tiantai in Xuanhan County, Sichuan is studied by AHP (analytic hierarchy process) method. Five evaluation elements including lineament structure, road, land use, slope grade and slope aspect are selected for landslide hazard assessment. The study area is divided into six regions by weight overlay as follows,landslide extremely easily happening, landslide very easily happening, landslide easily happening, landslide possibly happening, landslide difficultly happening and landslide hardly ever happening. Compared with field survey and related study results, it is found that the results coincide properly with the actual situation. The risk of regional landslide hazard can be assessed by the method provided in this paper.