Welcome to visit Geoscience!

Geoscience ›› 2017, Vol. 31 ›› Issue (05): 900-910.

• Research on the Main Geohazards and Engineering Geological Problems Along the SichuanTibet Railway • Previous Articles     Next Articles

Analysis of In-situ Stress Measurement and Real-time Monitoring Results in Nyching of Tibetan Plateau and Its Response to Nepal MS8.1 Earthquake

ZHANG Peng1,2(), QU Yaming3, GUO Changbao1,2(), FENG Chengjun1,2, MENG Wen1,2, FAN Yulu4, TAN Chengxuan1,2, WANG Lei5   

  1. 1. Institute of Geomechanics, Chinese Academy of Geological Sciences, Beijing 100081, China
    2. Key Laboratory of Neotectonic Movement and Geohazard, Ministry of Land and Resources, Beijing 100081, China
    3. Yunnan Provincial Communication Planning and Design Institute, Kunming,Yunnan 650051,China
    4. School of Engineering and Technology, China University of Geosciences, Beijing 100083, China
    5. Southeastern Fujian Geological Party, Quanzhou,Fujian 362011, China
  • Received:2016-10-12 Revised:2017-05-10 Online:2017-10-10 Published:2017-11-06

Abstract:

To explore the in-situ stress in the fracture belt and its present activity, the authors gathered data from hydraulic fracturing for in-situ stress measurement and from piezomagnetic method for monitoring relative magnitude of in-situ stress along the drilling hole with total depth of 300 meters located in a granite-rich region in the northern part of Nyching, Tibet. The measurements of in-situ stress indicate the relationship of SH>Sh≥SV, and the structure features of shallow earth’s crust rock formation reveal that current horizontal principal stresses play a leading role in reverse fault activity. Moreover, the measured maximum principal in-situ stress strikes in NNE direction, reflecting present compressive properties with dextral slip activity of faulting to north-east and near-south-north trend. Calculated through measured principal stresses, the magnitudes of feature parameters (μm) are obtained to be in the range of 0.11 to 0.23, which reflect a lower-stress accumulative capability of the regional crust and inactivity of fault movement in this area. Although the direction of the maximum horizontal principal stress remains basically unchanged in the occurrence of Nepal MS8.1 earthquake, the stress-monitoring results show that before the earthquake the values of the maximum and minimum horizontal principal stresses increase in 0.35 MPa and 0.24 MPa, respectively; during the earthquake for the co-seismic effect the reduced values are 0.05 MPa and 0.04 MPa, respectively; while four months later after the earthquake the maximum horizontal principal stress is reduced by 0.05 MPa, and the minimum principal stress increases by 0.01 MPa. Based on the in-situ stress measuring and real-time monitoring results while the earthquakes happen, the change of stress fields can be investigated to understand the activity of regional faults and it is much significant for the study of seismic risk and crustal stability.

Key words: in-situ stress measurement, in-situ stress monitoring, seismic hazard, Nepal MS8.1 earthquake

CLC Number: