欢迎访问现代地质!

现代地质 ›› 2012, Vol. 26 ›› Issue (6): 1146-1153.

• 海洋与地球深部探测 • 上一篇    下一篇

利用成像测井资料分析汶川地震断裂带科学钻探3号孔(WFSD-3)裂缝特征

邹长春1,2,刘东明1,2,聂昕1,2,项彪1,2,牛一雄3,孔广胜4   

  1. 1.地下信息探测技术与仪器教育部重点实验室(中国地质大学,北京),北京100083;2.中国地质大学 地球物理与信息技术学院,
    北京100083;3. 中国地质调查局 发展研究中心,北京100037;4. 中国地质科学院 地球物理地球化学勘查研究所,河北 廊坊065000
  • 收稿日期:2012-06-15 修回日期:2012-09-12 出版日期:2012-10-24 发布日期:2012-10-31
  • 作者简介:邹长春,男,教授,博士生导师,1969年出生,地球探测与信息技术专业,主要从事地球物理测井及岩石物理方面的教学与科研工作。Email:zoucc@cugb.edu.cn。
  • 基金资助:

    教育部科学技术研究重点项目(109035);国家科技部科技支撑计划项目“汶川地震断裂带科学钻探”项目之“科学钻探与科学测井”课题;中央高校基本科研业务费专项资金资助项目。

Fracture Characterization Using Image Logging in Borehole 3 of Wenchuan Earthquake Fault Zone Scientific Drilling (WFSD-3)

 JU  Chang-Chun-1,2, LIU  Dong-Meng-1,2, NIE  Cuan-1,2, XIANG  Biao-1,2, NIU  Yi-Xiong-3, KONG  An-Qing-4   

  1. 1 Key Laboratory of Geo-detection (China University of Geosciences, Beijing), Ministry of Education, Beijing100083,China;
    2 School of Geophysics and Information Technology, China University of Geosciences, Beijing100083,China;
    3 Development and Research Center,China Geological Survey, Beijing100037,China;
    4 Institute of Geophysical and Geochemical Exploration, Chinese Academy of Geological Science, Langfang, Hebei065000,China
  • Received:2012-06-15 Revised:2012-09-12 Online:2012-10-24 Published:2012-10-31

摘要:

WFSD-3孔是汶川地震断裂带科学钻探主要钻孔之一,全井段(终孔深度1 50230 m)实施了连续取心(累计取心进尺1 54844 m)和测井作业。采集到的成像测井资料包含丰富的原位地质特征信息,对裂缝、破碎带识别和构造应力场分析具有重要作用。利用该钻孔的电阻率成像测井和超声成像测井资料,结合岩心资料进行了裂缝特征分析。结果表明,WFSD-3孔岩层高角度斜交缝最为发育,其次是低角度斜交缝,垂直缝和水平缝极少;25~200 m和900~1 000 m深度范围内裂缝尤为发育;不同深度的裂缝倾向存在明显差异:410 m之上主要分布于260°~290°,410~730 m集中于330°~360°,730~960 m主要分布于210°~240°,960~1 185 m与410 m之上基本一致,1 410~1 450 m与前述各深度段不同,集中于180°~200°;裂缝与破碎带、层理密切相关,宏观分布受构造控制。

关键词: 汶川地震断裂带, 科学钻探工程, 成像测井, 裂缝特征

Abstract:

The borehole of WFSD-3 is a main hole of the Wenchuan Earthquake Fault Zone Scientific Drilling. The continuous coring(total length of 1,548.44 m) and logging data of borehole  WFSD-3 have been acquired. The image logging data of borehole WFSD-3 contain a mass of in-situ geological feature information, which plays an important role in the identification of fractures, fracture zones and in the analysis of tectonic stress field. Using the resistivity and acoustic image logging data in conjunction with core data, the identification and analysis of fracture characterization were carried out. The results show that in the strata of borehole WFSD-3, high-angle oblique crossing fractures develop dominantly, followed by low-angle oblique crossing fractures. Vertical and horizontal fractures are rare. The fractures particularly develop at intervals of 25 m to 200 m and 900 m to 1,000 m in borehole WFSD-3. The main dip directions of fractures at different depths are obviously different: (1) above 410 m the main dip directions of fractures are between 260° and 290°; (2) from 410 m to 730 m, the main dip directions are between 330° and 360°; (3) from 730 m to 960 m, the main dip directions are between 210° and 240°; (4) from 960 m to 1,185 m, the main dip directions are basically consistent with those above 410 m;(5) from 1,410 m to 1,450 m, the fractures are different from those of the depths above with the main dip directions between 180° and 200°. Fractures are closely related to fracture zones and beddings, and the macro distribution of fractures is controlled by tectonics.

Key words: Wenchuan Earthquake Fault Zone, Scientific Drilling Project;image logging;fracture characterization